Courses:

Soil Behavior >> Content Detail



Syllabus



Syllabus



Course Description


This class presents a detailed study of soil properties with emphasis on interpretation of field and laboratory test data and their use in soft-ground construction engineering. Topics to be covered include: consolidation and secondary compression; basic strength principles; stress-strain strength behavior of clays, emphasizing effects of sample disturbance, anisotropy, and strain rate; strength and compression of granular soils; and engineering properties of compacted soils. Some knowledge of field and laboratory testing is assumed for all students. 1.37 is desirable, and 1.361 is a prerequisite.



Conduct of Subjects


  • Classes run as combination of regular lectures and class discussions.
  • Reading assignments include class notes and papers.
  • Do not consult any prior homework problems or exams.
  • Homework problems, class problems, and class discussion count 30%.
  • One 2-hour mid-term exam counts 30%.
  • One three-hour final exam counts 40%.


Lecture Topics




Introduction (Mostly Review of 1.361)


  • Scope of Course
  • Soil Composition
  • Water Absorption, Clay-water Forces, and Measurement of Soil Suction
  • Soil Structure
  • Classification Tests and USC System


Basic Strength Principles and Stress-Strain Behavior of Simple Clay; Soil Modeling


  • Types of Triaxial Tests and Strength Principles
  • Mechanisms of Volume (Pore Pressure) Change in Clays and Sands
  • Behavior of Normally Consolidated Simple Clay (Laddite)
  • Behavior of Overconsolidated Simple Clay (Laddite)
  • Hvorslev Parameters and Extension Tests
  • Modified Cam-Clay Model


Consolidation Behavior of Saturated Soils


  • Introducation (K0 Trends and Measurement, Role of Oedometer Test)
  • Amount of 1-D Settlement (Preconsolidation Mechanisms and Measurement, Disturbance, Creep, etc.)
  • Rate of 1-D Consolidation
  • Secondary Compression (Cα/Cc, Hypothesis A vs. B)
  • 2-D and 3-D Settlement (Initial, Amount and Rate of Consolidation)
  • Problem Soils (Sensitive, Organic, Expansive, Collapsing, Varved, etc.)


Stability Problems and Drained Strength Analyses


  • Overview (Classes of Probems, Types of Analyses and Corresponding Strength Parameters for UU, CU and CD Cases)
  • Effective Stress Parameters for Drained Analyses (Measurement and Problem Soils)


Undrained Strength-Deformation Behavior of Saturated Clays and Undrained Strength Analyses


  • Conventional Practice for UU Case (In Situ and Lab Techniques)
  • Sample Disturbance
  • Stress System (σ2 and Anisotropy)
  • Overview of MIT-E3 Model
  • Time (Strain Rate and Creep)
  • Conclusions and Special Problems
  • Staged Construction (CU Case)


Strength-Deformation Behavior of Cohesionless Soils


  • Strength Components and Steady-state Line
  • Effects of Density, Confinement and σ2 on Drained and Especially Undrained Behavior
  • Effects of Sand Structure (Anisotropy, Stress History, Heterogeneity etc.)
  • MIT-S1 Model Overview


Compacted Clays


  • Compaction Process (Fundamentals)
  • Structure and Engineering Properties
  • Effective Stress with S < 100%
  • Constitutive Modeling


Miscellaneous


  • Special Lecture on Precompression, Vertical Drains, and Case Histories
  • Mid-term Exam and Discussion of Home Problems


Comparison of Laboratory and In Situ Testing: Complimentary, Not Competing



LAB (oedometer, triaxial, etc.)IN SITU (FV, CPTU, DMT, SBPT, etc.)

Advantages

Well defined boundary conditions → well defined soil properties via interpretation with continuum mechanics.

Can control loading and drainage conditions → property variation with stress path and drainage.

Known soil type and features.

Advantages

Testing soil at in situ conditions and usually less affected by disturbance.

Usually lower cost, more rapid and some field tests (CPTU) can provide continuous profile.

Best suited for spatial variability → mean trends + scatter about mean.
Limitations

Sample disturbance

- Affects properties (especially cohesionless soils)
- Misleading spatial variations.

Discontinuous data on small fraction of soil

High cost
Limitations

Ill-defined boundary conditions (stress-strain-drainage)

- Need empirical correlations for soil properties

May not know soil type

 








© 2009-2020 HigherEdSpace.com, All Rights Reserved.
Higher Ed Space ® is a registered trademark of AmeriCareers LLC.